Description
Losi 22S Sprint Car Kydex® Max Adjustable Wing Mount Set (Front & Top w/Thumb Screws)
BOMBSHELLS Motorsports Exclusive – Max Adjustable Wing Mounts are finally here for your Losi 22S Sprint Car.
1/8″ Kydex® material provides: Greater chemical resistance than ABS and PC. Higher impact resistance than ABS. More uniform wall thickness than ABS and PC in deep drawn thermoformed parts. PROUDLY MADE IN THE USA For Racers by Racers
“Don’t settle for cheap 3D printed knock offs or Carbon Fiber mounts, which offer no flex during roll over and are more prone to breaking, (yes we tried both). Kydex is the best solution”
Settle for nothing less and take yours to the podium!
Losi 22S Sprint Car Kydex® Max Adjustable Wing Mounts (Front)
- Direct bolt on front replacement for Losi 22S Sprint with (2) supplied M3 x 8 Thumb Screws.
- Quick and easy adjustment with variable slot providing level precise movement.
- PRO Tip – Do not over tighten the Wing to Brace screws when installing.

Losi 22S Sprint Car Kydex® Max Adjustable Wing Mounts (Top)
- Direct bolt on replacement TOP WING MOUNT for Losi 22S Sprint with (4) supplied M3 x 14 Thumb Screws.
- Quick and easy adjustment with MAX variable screw positions for ultimate tunability.
Version 2.0 updated for additional durability, and rigidity (as shown below).

SPECS:
- Wing mounts are lighter than OEM plastic mounts.
- (15) Top Wing Mounting positions compared to the mere (3) on OEM.
- QUICK ADJUST Thumb Screws (((INCLUDED))) are made of steel (our testing found that aluminum were prone to snapping in sever crashes, then you are just “screwed” trying to remove that bit without replacing the whole cage).
- If you are unnecessarily concerned with the slight weight difference of these thumb screws, you are welcome to use your existing OEM screws.
TOP Wing Installation TIPS:
- Remove TOP (4) Wing Screws and Wing
- Replace each Side Mount (1) at a time with Textured Surface facing out.
- Once both NEW Side Mounts installed with included (4) Long Thumb Screws, for TOP Wing, reattach TOP Wing.
Front Wing Install
- Remove (2) top Front Wing screws and Wing
- Replace Each Side Mount (1) at a time with Textured Surface facing out (note 2 top screws on side mounts DO NOT TIGHTED passed touching of Kydex mount. (DO NOT CRANK THESE DOWN) – Note these have a slight bend.
- (2) Short Thumb Screws go in front adjustable portion of the Mounts
- Replace front Wing (2) screws
Compatibility
- Losi 22S Sprint
