Skip to content
-
Get your HAUL ON! - Complete Scale Trailer setup -
This is a FULL SET of Mirage TT Belted Tires (4). Pro-Line is proud to announce a tire and wheel combo for your large-scale Desert Truck! The Mirage TT is inspired by full-size trophy truck tires to create a super-scale look while also giving your rig the ultimate performance upgrade with Belted tire technology! The Mirage TT tire is BELTED to handle extreme power and high speeds with ease. No tire ballooning here! These tires and new Raid 2.4/3.25" wheels have been developed from the ground up to be lightweight and durable enough to handle extreme punishment, giving you the best all-around bashing experience possible. Our legendary M2 compound provides all the grip you need no matter what track, road, or bash surface you're driving on. The Raid 2.4/3.25" Wheel features a removable hex for ultimate versatility. Not only do the included 17mm hexes give you the option between the MOJAVE™ 6S and Unlimited Desert Racer® axles and offsets, but they also allow you to easily replace a damaged wheel hex without needing to replace your glued tires. The hefty 6x30 interlocking hex design is secured to the wheel by 6 M3 screws that are spaced 30mm across. Replacement Hexes are available separately (PRO639000), while our full line of 6x30 hexes will also fit whatever custom build or fitment you can dream up. This tire and wheel package is proudly manufactured and assembled at Pro-Line Headquarters in the USA! If you are ready to take your MOJAVE™ 6S and UDR® to the next level of Performance and Durability, then you need Pro-Line's new Mirage TT Tires! Please note that the Mirage TT tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Mirage TT tires that is 70 mph or about 4,500 RPM. Over-revving your Mirage TT tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two, or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. Please note: BOMBSHELLS Tire Bundle sold in complete sets of (4) tires, to outfit your truck completely. PRO1022410 | Mirage TT BELTED Tires Mounted on Raid Black 6x30 Removable 17mm Hex Wheels (4) for Mojave™ 6S and UDR® Front and Rear -
Bundle Set of Front & Rear TOYOs Premounted on Gunmetal 17mm Wheels
-
TIRE FEATURES
- Licensed Toyo® Proxes R888R™
- Made from Pro-Line's Long-wear S3 Rubber Compound
- Scale Replica of the High-performance Track Tire
- Maximum Street and Speed-Run Performance
- Pre-Mounted for Your Convenience
- Made in USA
WHEEL FEATURES- GT3-Inspired 10-spoke design
- Satin Gunmetal finish
- Super scale detailing
- Available in 47mm (Front) and 53mm (Rear) widths
-
-
SALE!
NEW BOMBSHELLS Motorsports Mini-Z Auto Scale Body set.
Includes:
- Kyosho ASC
MA020 MAZDA SAVANNA RX-7 FC3S White
Autoscale Body - Tires (4 pcs)
- Wheels (4 pcs)
- Kyosho ASC
-
SALE!
NEW BOMBSHELLS Motorsports Mini-Z Auto Scale Body set.
Includes:
- Kyosho Chevrolet Corvette C8.R Gunmetal Autoscale Body
- Tires (4 pcs)
- Wheels (4 pcs)
- Fits MR03W-MM
- Wheelbase: LL 98mm
- Wheel Offset: F: N+3 / R: W+3
-
SALE!
NEW BOMBSHELLS Motorsports Mini-Z Auto Scale Body set.
Includes:
- Kyosho Chevrolet Corvette C8.R Yellow Autoscale Body
- Tires (4 pcs)
- Wheels (4 pcs)
- Fits MR03W-MM
- Wheelbase: LL 98mm
- Wheel Offset: F: N+3 / R: W+3
-
SALE!
Bring home the "Legend" - Rare Discontinued Body Set - Complete and Custom Painted with custom decals.
Comes as shown with everything you see here. -
SALE!
AVAILABLE NOW - HIGHLY OPTIONED OUT & UPGRADED - Factory Team DR10M Roller Build by Rc Bombshells.
Beautiful piece of art, engineering with carbon fiber, aluminum and blue anodized upgrades throughout and built to bring home the bacon with this BAD BOY, we call the "Hyper Blue"
BONUS included in this package:
- FREE Bombshells Premium Gear Balm
- FREE BOMBSHELLS Motorsports Shirt.
- FREE 360 Rotating Car Stand
-
SALE!
Brand New LOSI 1/16 No Prep Drag Car w/Custom Painted Tamiya Alpine A110 1973 Jager Meister Body. Stand out from the crowd with this one!
FREE SHIPPING & MIP Mini Car Stand (included)
Based on our Mini 22 platform, the Losi® (shortened wheelbase) 2WD Mini No Prep "Dragermeister" Car gives new RC drivers an easy, unique, low-cost way to compete. If you're a serious racer, you'll have lots of high-performance fun running a mini version of your 1/10 scale car! BOMBSHELLS Exclusive meticulously detailed body w/Wing on a box stock RTR . -
SALE!
NO PREP GREEN BEAST!
IN STOCK PRIORITY SHIPPING. Claim yours now! Sensored 1412-6400KV 4-Pole Brushless Motor [CSE060-0089-00] The 1412-6400kv motor is a very high torque, high wattage, mid-RPM motor designed for 2s no prep Street Eliminator racing. Castle went with a slightly different approach than current motors on the market. Most no prep motors are standard 540 size with very high kv (low turn). These motors rely on high RPM and low torque to push the car down the track (think turbo charged 4 cylinder). The 1412 is longer than most drag motors, which provides significantly more torque, acceleration, and cooler temps (think American Muscle). This results in a high horsepower, snappy, cool running motor. Your final drive ratio will need to be decreased (larger pinion/smaller spur) to get the RPMs up for top speed; due to the size of the motor it will take just about any gearing and CHEAT timing you can throw at it. They beefed up the design over a standard 14xx series motor to handle the high demands of drag racing. It uses a 5mm output shaft, 10AWG battery wires and 6.5mm bullets. Due to the high power nature of this motor it is highly recommended to use a 1/8th scale size ESC or larger. The 1/8th Mamba Monster X and 1/6th scale Mamba Monster X 8s are great pairings with this motor. -
Mamba Monster X 8S COMBO, 33.6V ESC w/ 1717-1650KV Sensored Motor
Drive fearlessly and punch that throttle! ENJOY FREE SHIPPING ON US with this one -
SALE!
DR10 DIFF UPGRADE. Add the TOP SHAFT and our Gear Balm for best Performance. Combine shipping and save.
-
Sold out!Out of stock
**NEW**BAD ASS BAR from RDesignRC.
-
SALE!
BOMBSHELLS Motorsports "FOX Edition" SCX6 Jeep JLU Wrangler with PROLINE's discontinued Bronze Method 305 NV Wheels installed. - FREE SHIPPING
Inspired from SEMA builds and Mint 400 livery, you are looking at our one off custom painted SCX6 showcased in the shop that is now up for grabs. This is a brand new RTR with custom paint, wheels and metal rock sliders. This rig has never been ran and meticulously custom painted with hand cut graphics and textured roof. Steal the show and conquer the trails with this one off creation from Rc Bombshells. -
GT24 1/24 Scale M-Sport 2022 PUMA Hybrid Rally1, Brushless Micro 4WD RTR
Fast, Fun, Affordable,Upgradable, Robust and Collectable. What more could any self-respecting petrol head want? -
GT24 1/24 Scale Micro 4WD Brushless RTR, 1985 Audi Sport Quattro S1
Fast, Fun, Affordable,Upgradable, Robust and Collectable. What more could any self-respecting petrol head want? -
GT24 1/24 Scale Micro 4WD Brushless RTR, Mitsubishi Lancer Evo 4 WRC
Fast, Fun, Affordable,Upgradable, Robust and Collectable. What more could any self-respecting petrol head want? -
The Hobbywing EZRun MAX6 V3 Sensorless Brushless ESC & Motor Combo includes the 4985SL 1/7 scale, 1650kV motor and is a great option for high-end, aggressively powered 3S - 6S builds.
Tons of torque and power. We love 'em in our ARRMA builds.
-
This is a pack of four JConcepts "Satellite" Tire Glue Bands. JConcepts has reinvented the tire mounting rubber band. A uniquely molded design, specifically developed for tire mounting, the rubber band is produced in a high-elasticity material capable of stretching to a full assortment of different sized tires. Finely detailed array of handles are designed to ergonomically conform to your fingers so the user can deftly adjust the rubber band to the sidewall of each tire to apply the pressure where it is needed. Features:- Unique JConcepts shape and function
- High-elasticity material
- Finely detailed array of handles
- Designed for fingertip control
- Multiple color options
- 4 pieces included per package
- Fits – 1/10th, SCT and 1/8th buggy and NO PREP DRAG TIRES PERFECTLY
-
SALE!
STAND with the CHAMPIONS with the JCONCEPTS Metal 1/10, 1/8 Car Stand
-
SALE!
GET ORGANIZED in Style
Add to your order and save on FLAT RATE shipping. -
SALE!
KYO32531MO
MINI-Z 4x4 Series MX-01 Readyset Land Rover Defender 90 Adventure Phoenix Orange/Santorini Black The Land Rover Defender 90 is now added to the MINI-Z 4x4 line. The extremely popular British off-road SUV has been accurately downscaled to a table-top crawling size!. READY SET CONTENTS Complete chassis with built-in electronics. Factory-painted body complete with many fine details KT-531P 2.4GHz transmitter Pinion gear set(10T, 12T,14T, 16T, 18T, 20T 3 types of motor spacers Pairing stick REQUIRED FOR OPERATION 8 x AAA batteries TECHNICAL DATA Scale: 1/24 Length: 185.8mm Width: 83mm Height: 104mm Chassis Type: MX-01 Wheelbase: 110.0mm Tread (F): 72.7mm Tread (R): 72.7m Weight: 248.6g (excl. battery) 130 class motor Gear Ratio: 55.44, 46.20, 39.60, 34.65, 30.80, 27.72:1 Tire Diameter (F/R): 42.0mm/42.0mm Tire Width (F): 14.3mm Tire Width (R): 14.3mm Transmitter: included (KT-531P) Top speed: approx. 2.7 - 5.4 km/h Runtime: approx. 60min Features:- KT-531P transmitter features steering trim, throttle trim, steering D/R, light flashing speed
- Incorporates a ladder frame design with steel vertical plates
- Full ball bearing specifications
- The factory-painted body has so much detail it rivals that of a die cast model
- Slipper clutch protects the drive system by reducing excessive load applied
Needed to Complete:
- (4) AAA-size alkaline or Ni-MH batteries for chassis
- (4) AAA-size alkaline batteries for transmitter
-
SALE!
KYO32526GM
MINI-Z 4x4 Series MX-01 Readyset Land Rover Defender 90 Autobiography Corris Gray / Santorini Black The Land Rover Defender 90 is now added to the MINI-Z 4x4 line. The extremely popular British off-road SUV has been accurately downscaled to a table-top crawling size!. READY SET CONTENTS Complete chassis with built-in electronics. Factory-painted body complete with many fine details KT-531P 2.4GHz transmitter Pinion gear set(10T, 12T,14T, 16T, 18T, 20T 3 types of motor spacers Pairing stick REQUIRED FOR OPERATION 8 x AAA batteries TECHNICAL DATA Scale: 1/24 Length: 185.8mm Width: 83mm Height: 104mm Chassis Type: MX-01 Wheelbase: 110.0mm Tread (F): 72.7mm Tread (R): 72.7m Weight: 248.6g (excl. battery) 130 class motor Gear Ratio: 55.44, 46.20, 39.60, 34.65, 30.80, 27.72:1 Tire Diameter (F/R): 42.0mm/42.0mm Tire Width (F): 14.3mm Tire Width (R): 14.3mm Transmitter: included (KT-531P) Top speed: approx. 2.7 - 5.4 km/h Runtime: approx. 60min Features:- KT-531P transmitter features steering trim, throttle trim, steering D/R, light flashing speed
- Incorporates a ladder frame design with steel vertical plates
- Full ball bearing specifications
- The factory-painted body has so much detail it rivals that of a die cast model
- Slipper clutch protects the drive system by reducing excessive load applied
Needed to Complete:
- (4) AAA-size alkaline or Ni-MH batteries for chassis
- (4) AAA-size alkaline batteries for transmitter
-
SALE!
KYO32529GR
MINI-Z 4x4 Series MX-01 Readyset Land Rover Defender 90 Autobiography Coniston Green The Land Rover Defender 90 is now added to the MINI-Z 4x4 line. The extremely popular British off-road SUV has been accurately downscaled to a table-top crawling size!. READY SET CONTENTS Complete chassis with built-in electronics. Factory-painted body complete with many fine details KT-531P 2.4GHz transmitter Pinion gear set(10T, 12T,14T, 16T, 18T, 20T 3 types of motor spacers Pairing stick REQUIRED FOR OPERATION 8 x AAA batteries TECHNICAL DATA Scale: 1/24 Length: 185.8mm Width: 83mm Height: 104mm Chassis Type: MX-01 Wheelbase: 110.0mm Tread (F): 72.7mm Tread (R): 72.7m Weight: 248.6g (excl. battery) 130 class motor Gear Ratio: 55.44, 46.20, 39.60, 34.65, 30.80, 27.72:1 Tire Diameter (F/R): 42.0mm/42.0mm Tire Width (F): 14.3mm Tire Width (R): 14.3mm Transmitter: included (KT-531P) Top speed: approx. 2.7 - 5.4 km/h Runtime: approx. 60min Features:- KT-531P transmitter features steering trim, throttle trim, steering D/R, light flashing speed
- Incorporates a ladder frame design with steel vertical plates
- Full ball bearing specifications
- The factory-painted body has so much detail it rivals that of a die cast model
- Slipper clutch protects the drive system by reducing excessive load applied
Needed to Complete:
- (4) AAA-size alkaline or Ni-MH batteries for chassis
- (4) AAA-size alkaline batteries for transmitter
-
SALE!
KYO32526GR
MINI-Z 4x4 Series MX-01 Readyset Land Rover Defender 90 Heritage Grasmere Green / Alaska White The Land Rover Defender 90 is now added to the MINI-Z 4x4 line. The extremely popular British off-road SUV has been accurately downscaled to a table-top crawling size!. READY SET CONTENTS Complete chassis with built-in electronics. Factory-painted body complete with many fine details KT-531P 2.4GHz transmitter Pinion gear set(10T, 12T,14T, 16T, 18T, 20T 3 types of motor spacers Pairing stick REQUIRED FOR OPERATION 8 x AAA batteries TECHNICAL DATA Scale: 1/24 Length: 185.8mm Width: 83mm Height: 104mm Chassis Type: MX-01 Wheelbase: 110.0mm Tread (F): 72.7mm Tread (R): 72.7m Weight: 248.6g (excl. battery) 130 class motor Gear Ratio: 55.44, 46.20, 39.60, 34.65, 30.80, 27.72:1 Tire Diameter (F/R): 42.0mm/42.0mm Tire Width (F): 14.3mm Tire Width (R): 14.3mm Transmitter: included (KT-531P) Top speed: approx. 2.7 - 5.4 km/h Runtime: approx. 60min Features:- KT-531P transmitter features steering trim, throttle trim, steering D/R, light flashing speed
- Incorporates a ladder frame design with steel vertical plates
- Full ball bearing specifications
- The factory-painted body has so much detail it rivals that of a die cast model
- Slipper clutch protects the drive system by reducing excessive load applied
Needed to Complete:
- (4) AAA-size alkaline or Ni-MH batteries for chassis
- (4) AAA-size alkaline batteries for transmitter
-
SALE!
Mini-Z 4x4 Readyset w/Toyota 4Runner Body (Black)
-
SALE!
MINI-Z 4×4 Series Readyset JeepⓇ Wrangler Unlimited Rubicon Bright White [KYO32528S]
The Jeep Wrangler Unlimited Rubicon is now equipped with fat tires and accessories. The extremely popular American off-road SUV has been accurately downscaled to a table-top crawling size, including the iconic seven-slot grille and large fender flares as well as its unlimited rock crawling performance. READY SET CONTENTS Complete chassis with built-in electronics. Factory-painted body complete with many fine details KT-531P 2.4GHz transmitter Pinion gear set(10T, 12T,14T, 16T, 18T, 20T 3 types of motor spacers Pairing stick REQUIRED FOR OPERATION 8 x AAA batteries Runtime: approx. 60min Features:- KT-531P transmitter features steering trim, throttle trim, steering D/R, light flashing speed
- Incorporates a ladder frame design with steel vertical plates
- Full ball bearing specifications
- The factory-painted body has so much detail it rivals that of a die cast model
- Slipper clutch protects the drive system by reducing excessive load applied
-
SALE!
KYO32528S
MINI-Z 4x4 Series MX-01 Readyset Jeep Wrangler Unlimited Rubicon with Accessory Parts Billet Silver The Jeep Wrangler Unlimited Rubicon is now equipped with fat tires and accessories. The extremely popular American off-road SUV has been accurately downscaled to a table-top crawling size, including the iconic seven-slot grille and large fender flares as well as its unlimited rock crawling performance. READY SET CONTENTS Complete chassis with built-in electronics. Factory-painted body complete with many fine details KT-531P 2.4GHz transmitter Pinion gear set(10T, 12T,14T, 16T, 18T, 20T 3 types of motor spacers Pairing stick REQUIRED FOR OPERATION 8 x AAA batteries TECHNICAL DATA Scale: 1/24 Length: 202.0mm Width: 95.0mm Height: 96.0mm Chassis Type: MX-01 Wheelbase: 120.0mm Tread (F): 77.0mm Tread (R): 77.0mm Weight: 247.6g (excl. battery) 130 class motor Gear Ratio: 55.44, 46.20, 39.60, 34.65, 30.80, 27.72:1 Tire Diameter (F/R): 40.5mm/40.5mm Tire Width (F): 18.0mm Tire Width (R): 18.0mm Transmitter: included (KT-531P) Top speed: approx. 2.7 - 5.4 km/h Runtime: approx. 60min Features:- KT-531P transmitter features steering trim, throttle trim, steering D/R, light flashing speed
- Incorporates a ladder frame design with steel vertical plates
- Full ball bearing specifications
- The factory-painted body has so much detail it rivals that of a die cast model
- Slipper clutch protects the drive system by reducing excessive load applied
-
SALE!
KYO32528GR
MINI-Z 4x4 Series MX-01 Readyset Jeep Wrangler Unlimited Rubicon with Accessory Parts Billet Mojito The Jeep Wrangler Unlimited Rubicon is now equipped with fat tires and accessories. The extremely popular American off-road SUV has been accurately downscaled to a table-top crawling size, including the iconic seven-slot grille and large fender flares as well as its unlimited rock crawling performance. READY SET CONTENTS Complete chassis with built-in electronics. Factory-painted body complete with many fine details KT-531P 2.4GHz transmitter Pinion gear set(10T, 12T,14T, 16T, 18T, 20T 3 types of motor spacers Pairing stick REQUIRED FOR OPERATION 8 x AAA batteries TECHNICAL DATA Scale: 1/24 Length: 202.0mm Width: 95.0mm Height: 96.0mm Chassis Type: MX-01 Wheelbase: 120.0mm Tread (F): 77.0mm Tread (R): 77.0mm Weight: 247.6g (excl. battery) 130 class motor Gear Ratio: 55.44, 46.20, 39.60, 34.65, 30.80, 27.72:1 Tire Diameter (F/R): 40.5mm/40.5mm Tire Width (F): 18.0mm Tire Width (R): 18.0mm Transmitter: included (KT-531P) Top speed: approx. 2.7 - 5.4 km/h Runtime: approx. 60min Features:- KT-531P transmitter features steering trim, throttle trim, steering D/R, light flashing speed
- Incorporates a ladder frame design with steel vertical plates
- Full ball bearing specifications
- The factory-painted body has so much detail it rivals that of a die cast model
- Slipper clutch protects the drive system by reducing excessive load applied
-
SALE!
MINI-Z Racer MR-03EVO SP Chassis Set Green Limited (N-MM2/4100KV) [KYO32798SP]
MINI-Z Racer MR-03EVO SP Chassis Set Green Limited (N-MM2/4100KV) The new MR-03EVO SP can be controlled with transmitters from multiple brands by plugging a dedicated receiver unit released from each brand into the receiver compartment on the upper part of the chassis. Equipped with nickel plated hex screws, oil shock and special color Ball Diff II as standard and comes with newly developed suspension arms with various caster angles for wider setup options! Compatible Rx Modules: No. 82040 for Kyosho KT-18, EX-6, EX-6R and KO EX-2, EX-RR No. 82041 for Kyosho KT-531P, KT432PT No. 82042 for Futaba 10PX, 7PX, 7XC, 4PM No. 82043 for KO Propo EX-NEXT, MC-8 Remote gyro parameter setting: Throttle and steering gyro gain values are assigned to CH3 and CH4 signals, so you can adjust them while driving by assigning switches and dials of your transmitter. Separate front upper suspension arm mount: Front suspension arms are mounted on a part that is separate from the upper cover, which enables quicker front tread conversion. CHASSIS SET CONTENTS Almost-factory-assembled MR-03N-MM2 chassis equipped with brushless ESC unit Front width conversion parts Pinion Gears (6T, 7T, 8T, 9T) Front suspension adjustment spacers Pinion gear removal tool Wheel wrench REQUIRED FOR OPERATION Transmitter Receiver Unit 4 x AAA NiMH batteries for chassis Batteries for transmitter Mini-Z Auto Scale Collection (Body shell, wheels and tires) TECHNICAL DATA Scale: 1/27.6 Length: 117.7mm Width: 65-76mm Height: 35mm Chassis Type: MR-03N-MM2 Wheelbase: 94.0mm(L) Tread: Depending on wheel offset Weight: 135g 130 class 4100KV brushless motor Gear Ratio: 7.3, 6.3, 5.5, 4.9:1 Tire Diameter (F): sold separately Tire Diameter (R): sold separately Tire Width (F): sold separately Tire Width (R): sold separately Transmitter: sold separately Receiver Unit: sold separately Features:- Ball bearings
- Gold plated battery terminals
- 130-class compatible size 4100KV sensor-less brushless motor with double ball bearings and aluminum heatsink case.
- ESC and servo parameters adjustable via the ICS expansion port.
- Power indicator feature. Good for equal condition races.
- Gyro (sold separately) gain can be controlled via transmitter dials or switches.
- Separate receiver unit construction (receiver unit sold separately)
- Special green anodized ball diff
- Oil shock as standard
- Nickel plated hex screws
- Front upper arms with caster angles of 1 deg, 2 deg and 3 deg included
-
SALE!
MINI-Z Racer MR-03EVO SP Chassis Set Blue Limited (N-MM2/5600KV) [KYO32793SP]
The MR-03EVO SP can be controlled with transmitters from multiple brands by plugging a dedicated receiver unit released from each brand into the receiver compartment on the upper part of the chassis. Equipped with nickel plated hex screws, oil shock and special color Ball Diff II as standard and comes with newly developed suspension arms with various caster angles for wider setup options! Compatible Rx Modules: No. 82040 for Kyosho KT-18, EX-6, EX-6R and KO EX-2, EX-RR No. 82041 for Kyosho KT-531P, KT432PT No. 82042 for Futaba 10PX, 7PX, 7XC, 4PM No. 82043 for KO Propo EX-NEXT, MC-8 Remote gyro parameter setting: Throttle and steering gyro gain values are assigned to CH3 and CH4 signals, so you can adjust them while driving by assigning switches and dials of your transmitter. Separate front upper suspension arm mount: Front suspension arms are mounted on a part that is separate from the upper cover, which enables quicker front tread conversion. CHASSIS SET CONTENTS Almost-factory-assembled MR-03N-MM2 chassis equipped with brushless ESC unit Front width conversion parts Pinion Gears (6T, 7T, 8T, 9T) Front suspension adjustment spacers Pinion gear removal tool Wheel wrench REQUIRED FOR OPERATION Transmitter Receiver Unit 4 x AAA NiMH batteries for chassis Batteries for transmitter Mini-Z Auto Scale Collection (Body shell, wheels and tires) TECHNICAL DATA Scale: 1/27.6 Length: 117.7mm Width: 65-76mm Height: 35mm Chassis Type: MR-03N-MM2 Wheelbase: 94.0mm(L) Tread: Depending on wheel offset Weight: 135g 130 class 5600KV brushless motor Gear Ratio: 7.3, 6.3, 5.5, 4.9:1 Tire Diameter (F): sold separately Tire Diameter (R): sold separately Tire Width (F): sold separately Tire Width (R): sold separately Transmitter: sold separately Receiver Unit: sold separately Features:- Ball bearings
- Gold plated battery terminals
- 130-class compatible size 5600KV sensor-less brushless motor with double ball bearings and aluminum heatsink case.
- ESC and servo parameters adjustable via the ICS expansion port.
- Power indicator feature. Good for equal condition races.
- Gyro (sold separately) gain can be controlled via transmitter dials or switches.
- Separate receiver unit construction (receiver unit sold separately)
- Special blue anodized ball diff
- Oil shock as standard
- Nickel plated hex screws
- Front upper arms with caster angles of 1 deg, 2 deg and 3 deg included
-
Sold out!SALE!Out of stock
MINI-Z RWD Series Ready Set Chevrolet Corvette C8.R Gunmetal
With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the new circuit board provides linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW446). This series represents the perfect package for a deep dive into the amazing world of R/C cars! *Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems. With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the new circuit board provides linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW446). This series represents the perfect package for a deep dive into the amazing world of R/C cars! READY SET CONTENTS Factory-assembled chassis equipped with KT-531P compatible Rx-ESC unit Painted and marked plastic body shell Tread width conversion parts Pinion Gears (6T, 7T, 8T, 9T) Front suspension adjustment spacers Pinion gear removal tool Spare wheel nuts Wheel wrench Wheels and tires REQUIRED FOR OPERATION 8x AAA batteries Features:- KT-531P transmitter features steering trim, throttle trim, steering D/R, light flashing speed
- Soft foam steering wheel ensures delicate non-slip steering control
- Full ball bearing specifications
- MR-03 Compatible chassis components
- Almost all optional parts for MR-03 and MR-03 Sports can be used
- Gyro socket and adjustment volume equipped
- Length: 173.0 mm, Width: 78.0 mm, Height: 45.0 mm
- Chassis Type: MR-03W-MM
- Wheelbase: 98.0mm
- Tread (F): 67.5mm, Tread (R): 65.0mm
- Weight: 169g
- Gear Ratio: 7.3, 6.3, 5.5, 4.9:1
-
Sold out!SALE!Out of stock
MINI-Z RWD Series Ready Set Chevrolet Corvette C8.R Yellow
With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the new circuit board provides linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW446). This series represents the perfect package for a deep dive into the amazing world of R/C cars! *Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems. With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the new circuit board provides linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW446). This series represents the perfect package for a deep dive into the amazing world of R/C cars! READY SET CONTENTS Factory-assembled chassis equipped with KT-531P compatible Rx-ESC unit Painted and marked plastic body shell Tread width conversion parts Pinion Gears (6T, 7T, 8T, 9T) Front suspension adjustment spacers Pinion gear removal tool Spare wheel nuts Wheel wrench Wheels and tires REQUIRED FOR OPERATION 8x AAA batteries Features:- KT-531P transmitter features steering trim, throttle trim, steering D/R, light flashing speed
- Soft foam steering wheel ensures delicate non-slip steering control
- Full ball bearing specifications
- MR-03 Compatible chassis components
- Almost all optional parts for MR-03 and MR-03 Sports can be used
- Gyro socket and adjustment volume equipped
- Length: 173.0 mm, Width: 78.0 mm, Height: 45.0 mm
- Chassis Type: MR-03W-MM
- Wheelbase: 98.0mm
- Tread (F): 67.5mm, Tread (R): 65.0mm
- Weight: 169g
- Gear Ratio: 7.3, 6.3, 5.5, 4.9:1
-
SALE!
MINI-Z RWD Series Ready Set RAYBRIG NSX Concept-GT 2014 [KYO32350RG]
The MINI-Z RWD MR-03 series replaces the MR-03 Sports 2. Combined with the KT-531P transmitter and full ball bearing specifications, the MINI-Z RWD provides more value at the same price. The KT-531P transmitter features a soft foam steering wheel and is equipped with a throttle trim control knob. The RX unit is equipped with expansion ports for optional gyro units. Note: MINI-Z RWD and KT-531P use FHSS protocol and are not compatible with other MINI-Z models. The KT-432PT transmitter will have compatibility in firmware versions 201710 and later. FHSS system for MINI-Z is not compatible with the FHSS system for larger scale models. MZW429R LED light unit is not compatible with the body.- Factory assembled chassis
- Pre-painted plastic body, complete with markings
- 2.4GHz Perfex KT-531P 2.4GHz transmitter
- Front tread adjustment parts set
- Front suspension adjustment spacers
- Pinion gears 6T, 7T, 8T, 9T
- Wheel wrench
- Pinion gear tool
- Spare nuts
- Pairing stick
- Tires, wheels
- Length: 179.0 mm Width: 74.0 mm Height: 44.0 mm
- Wheelbase: 98.0mm Tread (F): 63.5mm Tread (R): 61.0mm
- Weight: 130g
- Gear Ratio: 7.3, 6.3, 5.5, 4.9:1 (depending on pinion selected)
- Tire Diameter (F/R): 25.0mm Tire Width (F): 8.5mm (R): 11.0mm
-
More HOTNESS from RDesignRC for your Losi 22S Rear Arm UPGRADE
-
SALE!
NEW HOTNESS for your Losi 22S - GENIUS -
Sold out!Out of stock
BOMBSHELLS Motorsport Exclusive - CALDWELL RACE WORKS Wing for the Losi 22S F100. Only available here.
Stay tuned for more wings to come as we grow this category. -
NEW LIGHTWEIGHT MOTOR PLATE for your Losi 22S
Combine FLAT Rate Shipping and Save. Throw in some pinions, Shock Oil, Accessories or additional parts and pay no additional shipping!!!!! -
RC BOMBSHELLS Exclusive Losi 22S Titanium "Champion" Screw Kit - ONLY AVAILABLE HERE!!!
Bring the Gucci, lose the weight, win the race and concourse with this TOP SHELF screw kit; topping off your epic build. Add to your order and save on FLAT RATE Priority USPS shipping Not for the faint of heart! -
Losi Promoto-MX Rider Jersey Set (ClubMX)
Combine shipping and save with our PRIORITY FLAT RATE. -
Losi Promoto-MX Rider Jersey Set (FXR)
-
SALE!
GO BIG!!!!
SHIPPING NOW WHILE QUANTITIES LAST -
SALE!
***TOP UPGRADE*** ESC/MOTOR COMBO for your LOSI 1/16 Mini No Prep Drag Car
Includes Coupon for FREE Castle Link USB adapter or discounted B-Link Bluetooth adapter -
MICRO RS4 '69 Ford Mustang RTR-X, 1/18 Scale, w/ a 2.4GHz Radio
NEW SEALED IN BOX - Discontinued -
SALE!
GET YOUR PIT IN ORDER and dress up your best RC tools with these Gucci NEW collars by EXOTEK.
-
SALE!
BOMBSHELLS Motorsports OMF "Fox Edition" Jeep Crawler
SEMA inspired one-off custom painted SCX10 III showcased in the shop that is now up for grabs with those "Unicorn" OMF Wheels. "Swore we would never let these highly sought after wheels go ever, but they just look too good on this build!" This is a brand new (A)RTR with custom paint, wheels and unmounted custom roof rack we sourced out of Australia. This rig has never been ran and meticulously painted and detailed with hand cut graphics and textured roof. Steal the "Show n Shine" and conquer the trails with this one off creation from Rc Bombshells. -
Sold out!Out of stock
BOMBSHELLS Motorsport teams with BAAD Racing to bring you a BOMBSHELL's Exclusive ALL GOLD Performance Beadlock wheel that will set your build over the top. Never glue tires again, stand out in the crowd and be exclusive with this limited series wheel that is sure to perform and be legend for years to come.
Only available here from Rc BOMBSHELLS Mix n Match these multi piece wheels with the all BLACK or bare Billet Performance Cut wheels for endless combinations to go with your ride! -
SALE!
STEP UP YOUR PIT SWAG with the NEW PRO SERIES Power Duster
Pulled from box to demo. Back in original packaging. NEW -
SALE!
No Prep REEFS RC "TIDAL" Aluminum Bead lock Wheel Set
-
**NEW**BAD ASS BAR from RDesignRC.
